PT Tracon Industri (TRACON) was established in 2004 as a
subsidiary of PT Rekayasa Industri (REKIND), a well know Engineering,
Procurement & Construction (EPC) Company in Indonesia. We focus on
industrial plant solution and services, supported by well – trained,
experienced, committed technical and extraordinary team members. Our team
consists of qualified managers, engineers & specialist in their respected
field, providing services with strong foundation and commitment to project.
Throughout the years, TRACON has proved its capabilities in serving clients
since project development stage, during construction and up to plant services.
We would like to invite professionals from various
disciplines to join us and become part of our nation’s better future.
1. Project Engineer [Instrument] (Code: PEI)
a) Bachelor Degree (S1) Technique Physics / Electro
b) Experience min. 2 years in the same position
c) To lead the design activity related with metering package
system
d) Instrument system design on package unit
e) Design Engineering
f) To be place at Home Office (Jakarta)
2. HSE Officer (Code: HSEO)
a) Diploma III Technical
b) Experience min. 2 years in the same position
c) Having involved with Internal Audit, Documentation,
Support Project
d) Having Certification AK3 & Internal Auditor
e) Willing to be place at Home Office & Site
3. Pre Commissioning & Commissioning Engineer (Code:
Comm)
a) Pre- Comm, Comm Manager
b) Process Engineer
c) Mechanical Engineer
d) Electrical Engineer
e) Instrument Engineer
f) Supervisor
g) Foreman
h) Technician & Mechanic
i) Field Operator
• Bachelor Degree (S1) Engineer
• Having an experience in the same project (Pre
Comm&Comm)
• Having Certification for Pre-Comm&Comm Project
4. Project Management Consultancy (Code: PMC)
a) Project Manager
b) Construction Manager
c) Project Control Manager
d) Progress, Scheduler & Cost Control
e) Mechanical Engineer
f) Civil & Structure Engineer
g) Piping Engineer
h) Electrical Engineer
i) Instrument Engineer
j) Welding Inspector
k) Document Control
l) HSE Manager, Supervisor & Officer
m) QC Manager & QC Engineer
n) General Affair & General Admin
o) Warehouse & Material Control
- Bachelor Degree (S1) Engineer
- Having an experience in the same project (PMC)
- Having Certification for PMC
5. Operation & Maintenance (Code: OM)
a) Plant Manager / Site Manager / Maintenance Manager
b) Superintendent (Mechanical, Electrical Instrument,
Process)
c) Supervisor (Mechanical, Electrical Instrument)
d) Foreman (Mechanical, Electrical Instrument)
e) Technician (Mechanical, Electrical Instrument)
f) Analyzer Technician
g) Control Valve Technician
h) PSV Technician
i) HVAC Technician Plant
j) Machinist
k) Mechanic
l) Warehouse
m) Field Operator
n) General Affair
- Bachelor Degree (S1) Engineer / Diploma III / STM
- Having an experience in the same project (Operation &
Maintenance)
- Having Certification for O & M Project
6. Plant Assessment & Turn Around (Code: PATA)
a) Project Coordinator
b) Process Engineer
c) Techno Economic
d) Rotating Mechanical Engineer
e) Static Mechanical Engineer
f) Electrical Engineer
g) Instrument Engineer
h) Cost Estimator
i) Document Control
- Bachelor Degree (S1) Engineer / Diploma III / STM
- Having an experience in the same project (Plant Assessment
& Turn Around)
- Having Certification for Plant Assessment & Turn
Around Project
7. Vibration Technician (Code: VT)
shall have a minimum 7 years experience in condition
monitoring especially on vibration data collection and analysis.
Competencies are mandatory:
a. Understand basic knowledge of condition monitoring
b. Understand the purpose of collecting a certain type of
vibration data
c. Understand how vibration can indicate that a fault
condition exists
d. Understand how to correctly measure the vibration
e. Ability to download and upload routes, follow the routes,
record field observations, recognize when the test must be repeated.
Note :
a. Two of VT must be at least certified as Vibration Analyst
Category I (refer to ISO 18436-2 2014)
b. Four of six VT must be at least certified as Vibration
Analyst Category II (refer to ISO 18436-2 2014)
They shall are qualified to:
• Operate portable data collectors and pre-assigned routes
• Acquire readings from permanently installed
instrumentation, such as BN 3500, BN 1900, etc
• Input results into a database and download routes from a
computer
• Conduct testing under steady-state operating conditions
following predefined procedures
• Be aware of some of the causes and effects of bad
measurement data
• Compare overall or signal value vibration measurements
against pre-established alert settings
• Analysis of the condition monitoring data according to the
certification level
• Create a simple report on alarm status of the measured
parameter
• Classify, interpret and evaluate the test results
(including acceptance tests) in accordance with applicable specifications and
standards
• Maintain a database of results and trends
• Able to communicate effectively and write good reports
• Perform basic )single-channel) impact tests to determine
natural frequencies (for Category II or above)
• Understand basic single-plane and two –plane field
balancing concepts (for Category II or above)
• Perform basic vibration analysis of machinery and
components such as shafts, bearings, gears, fans, pumps, and motors using
spectrum analysis (for Category II or above)
• Recommend minor corrective actions (for Category II or
above)
8. Lube Oil Technician (Code: LOT)
shall have a min 7 years experiences in electrical condition
monitoring especially on lube oil data collection and analysis
Competencies are mandatory:
a. Basic knowledge of condition monitoring
b. Understand the purpose of collecting a certain type of
oil sample
c. Understand how to collect a sample with a minimum
contamination from surrounding environment or from cross sampling
d. Understand how to operate oil sampling tool such as
vacuum pump, drop tube, minimess valve, etc
e. Understand how to document operating condition while oil
sample was taken
f. Understand how to operate an oil sample for dispatch to
the oil laboratory
Note: LOT must be certified at least as level 1 lube oil
analysts (refer to ICML – International Council For Machinery Lubrication).
They shall be qualified to:
• Install sampling hardware such that a representative
sample may be efficiently and repeatedly extracted from mechanical systems
commonly found on oil and gas installations
• Effectively extract representative samples from typical
industrial machinery, and prepare them for analysis
• Employ basic oil analysis techniques to identify and
troubleshoot conditions of wring or degraded lubricant, and devise and
implement corrective actions.
• Employ basic oil analysis to identify and troubleshoot
contaminated lubricant conditions, and devise and implement corrective actions
• Employ basic oil analysis techniques to identify and
troubleshoot abnormal machine wear conditions, and devise and implement
corrective actions
• Inspect and receive new oil deliveries.
9. Condition Monitoring Coordinator (Code: CMC)
Shall be qualified to:
a. Responsible for the management of the Contractor’s
Personnel and the generation of the weekly and yearly report
b. Responsible for Contractor’s compliance to Company’s HSE
regulation as HSE representative
c. Competent to perform and/or direct machinery vibration
measurements, and vibration analysis for single-channel measurement, with or
without phase trigger signals, according to established and recognized
procedures.
d. Capable of carrying out oil sampling and troubleshooting
routine problems identified by lab test results/field lubricant inspections.
e. CMC Must be at least certified as Vibration Analyst
Category II (refer to ISO 18436-2 2014)
f. CMC min 5 years experiences in condition monitoring for
S1 or min 7 years experiences in condition monitoring for D3
g. CMC must be certified by AK3 Migas within the first year
of Contract period
10. Electric Technician and Analyst (Code: ETA)
– shall have min 7 years experiences in electrical condition
monitoring and fully experience on performing electrical condition monitoring
activities that are specified on this contract.
Competencies are mandatory:
a. Understand electrical equipment maintenance philosophies
b. Understand HV, MV and LV electrical equipment condition
monitoring
c. Understand Electrical Safety
d. Understand the purpose of collecting a certain type of
electrical parameter data
e. Understand how to collect an electrical parameter data
(such as current spectrum, partial discharge, tan delta) with a correct method
f. Understand how to install and operate measurement tool
such as motor current analysis firmware, infrared thermograph, PD analyzer
including sensor installation, tan delta analyzer and shaft voltage analysis
g. Understand how to document electrical parameter data was
taken,
h. Understand how to interpret electrical parameter data was
taken, reviewing the trending and give recommendation based on data taken
i. Understand the requirement of working in hazardous area
and electrical equipment installation in Hazardous area.
j. Shall certified level 2 in infrared thermograph
applications and has attended mandatory training of Electrical Safety based on
NFPA 70E or OSHA.
k. ETA min 5 years experiences in condition monitoring for
S1 or min 5 years experiences in condition monitoring for D3, min 3 years in
electrical condition monitoring in Oil & Gas industry.
If you would like to take the challenge, please send your
application, curriculum vitae and recent photograph to:
recruitment@tracon.rekayasa.co.id
cc: wahyu_ramadhani@tracon.rekayasa.co.id;
Irfan@tracon.rekayasa.co.id;
sam_ali@tracon.rekayasa.co.id;
tracon.industri@yahoo.com
Please write name Code, proposed position and Petromindo at
the subject.
for example:
Operation & Maintenance (Code: OM)_Mechanical
Technician_Petromindo
Only short candidate and right email subject to be proceed.
No comments :
Post a Comment